Как установить widescreen mod

Игра по-умолчанию предлагает нам только режим 4:3, но она отлично работает и с разрешениями с соотношением сторон например, 16:9.

В данном файле вам нужны строчки:

gamePIXY= (вертикальное разрешение)
gamePIXX= (горизонтальное разрешение)

После знака «=» прописываем разрешение по вертикали и горизонтали. Например:

Тогда игра будет запускаться в разрешении 1920:1080.

UPD (by iDoom). В комментах подсказали, что можно сделать проще: зайти по пути BloodRayne\system и там в файле RENDER.INI, в строке syncRetrace исправить 0 на 1. Это включит ограничение кадров.

Собственно решением проблемы с обрывающимися катсценами (на современных компьютерах) является выставление фиксированного значения кадров в секунду, а именно в 30 фпс (кадров в секунду).

Для этого можно использовать различные программы. Я здесь опишу как это делать с помощью RivaTuner Statistic Server, которая идет в комплекте с MSI Afterburner.

Это окно программы, которое вы видите после запуска:

Нажимаете на значок «+», который находится в нижнем левом углу, и добавляете exe файл игры, в нашем случае он называется «rayne.exe». Далее выделяете появившийся пункт rayne.exe.

После этого ищите в правой половине окна пункт «Framerate limit» и выставляете там значение 30.

Теперь, чтобы у вас были 30 фпс в игре, вам необходимо перед каждым запуском игры, запускать RivaTuner Statistic Server, иначе ограничение фпс не будет работать.

НО! Решая проблему с катсценами, мы возможно создаем другую (во всяком случае она у меня возникла). В конце второго акта вы будете сражаться с тремя стражами (трехголовые монстры с щупальцами) и с ограничением в 30 фпс, на нормале, на котором играл я, их несколько проблемно убивать даже в режиме кровавой ярости (вроде так называется). НО! Проблема полностью исчезает и стражи убиваются с помощью режима кровавой ярости на ура, если отключить ограничение фпс. Вот такая вот дилемма.

Quick widescreen howto

The launcher only offers 4:3 modes, but 16:9 works actually just fine. Fortunately it’s H+, which means you can see more on the horizontal axis.
\system\rayne.ini
Make a copy of that file. Now edit the original (at your own risk).
For 1080p:
gamePIXY=1080
gamePIXX=1920
For 720p:
gamePIXY=720
gamePIXX=1280
Leave gameWideScreenFlag on its default setting (0=off). If this one is enabled, the stretching of a 4:3 mode when displayed on a 16:9 screen is compensated. However, if you’re using a real 16:9 mode the display gets distorted. So, only enable this if you want to use a 4:3 mode on a 16:9 screen. Using a proper 16:9 mode will look better of course.

Cut scene speech issue fix

UPD (by iDoom). Go to BloodRayne\system
Then find RENDER.INI
Then change syncRetrace=0 to syncRetrace=1

Discovered a fix. It was all pretty obvious in a hindsight.

Источник

Как установить widescreen mod

RollerCoaster Tycoon 2: Triple Thrill Pack

EDIT: You can still do this, of course, but do you really want to when the astonishing and undeniably better OpenRCT2 port has been made with much more settings, options, and an in-game windowed mode ‘right out of the box’? Just keep that in mind, but if you still want to use this method then by all means! Just. acknowledge you’re missing out on a lot.

(Before reading this guide, you may be interested in the YouTube guide I made some years ago explaining the entire process in a quick and easy video format). However: This video is nowhere near as close as how descriptive I’ve made this guide, and if you plan on getting the «ultimate» RCT2 windowed/widescreen experience, it’d be best to give this guide a read through.

. and now on to the written format!

First of all, we’ll take a specific hack created by the wonderful ToadKing! Thanks, ToadKing!
https://github.com/downloads/ToadKing/ddhack/rct2-ddhack2.zip
TELL ME IF THIS LINK EVER BECOMES INVALID and I will update the link.
(that is a direct link, no page will show up, the file should appear instantly in your «Downloads» folder)

On to the next section!

That’s all it takes?! Yup! You’re now ready to start RCT2 in windowed mode! Now we’ll move on to widescreen!

[Unfortunately, RCT2 will not go beyond 1280×1024 in it’s current state. Perhaps somewhere out there exists a way to get higher resolutions, but I am not aware of it].

By default, the game should be in 800×600 resolution. This might be relatively small on your screen, and that would be because your resolution is much larger than the games default 800×600 (times were different back then). You can change the resolution of the game (in-game) by pressing the ‘Floppy‘ icon, scrolling to ‘Options‘, and under ‘Display‘, change the attributes to your computer or to your liking.

After you’ve set the resolution you like in-game, the window will very likely look quite strange on your monitor.
The windowed border is gone! How could this be.

The proper procedure would be to close the game (if your exit button on the top right isn’t showing, minus the game by clicking it on the taskbar, and bring it back up again. The boxes should now show).
The RCT2 boxes on the top however might look a little funky.

. and that’s where you can either just exit the game by clicking the X on the top right, or right click close on the taskbar. If these don’t work, you can force the game closed by pressing ALT+F4 or CTRL+SHIFT+ESC for Task Manager. Before the game closes, if you haven’t saved it recently, it should ask you if you’d like to save (unless you forced it closed). Once you’ve restarted the game, drag the window in a position that you best prefer, and start up your game! It should now run relatively well in a window!

This is my configuration, running the game in windowed mode at a resolution of 1280×720.
My laptops resolution is 1366×768, so this fits real nicely and gives me perfect space for the taskbar that I for some reason enjoy on the left side of my screen.

Before you go, you should read the last section as it contains some perhaps useful information if you come across something unexpected.

There are some known concerns regarding playing this game in windowed mode, below are all the concerns I’ve come across and how you can get «around» them.

— For some Windows 8.1 users, the right click/drag method for moving the screen around glitches, causing it to move way too fast towards the bottom right of the screen. This bug is unknown for a fix, so you may need to just use arrow keys or other methods for looking around such as the ones listed directly below this.

— Moving the mouse from corner to corner will still work, but is highly inconvinient due to it being in a window, and you’d have to be a little too precise, which is no fun. You’ve got two options here, you can (1) Press Ctrl+Z to keep the mouse cursor locked into your window (restoring the corner to corner look) or (2) Hold the right click on your mouse instead, and drag the mouse around to look around. It might seem a little different at first, but eventually, you’ll love it way more than the slow screen scroll you may have used previously.
Special thanks to «Quote Story +» user for introducing me to method 1.

— Sometimes, after launching the game, the screen will be affixed slightly higher than usual (black border on the lower half of the window). I’m not sure why, but by quiting the game, and restarting, the problem should be fixed. Rinse and repeat if this occurs often, it’s a very minor problem.

— Saving games will now be 100% compatable with Windows! (previously the RGB channels would get all messed up since the game attempts to render in a different bit format. Even with this, the game should still able to save on any x86 computer without problems).

— Setting program compatability to Windows 98 has helped various people who previously attempted the hack without success. This may not be frequently assisting, but it’s worth a mention. (credit to: «Master Baiter ΘωΘ» for his contributional success).

— RCT1 already has a windowed mode in-game! Strange how RCT2 didn’t get the implemented option. You can change to windowed mode in RCT1 using the options menu in-game, so there’s no need to look around for a guide for that! 🙂

— Executables such as «Raptr» and «AMD Gaming Evolved» have overlays that creates a bug that forces RCT2 to be stuck at the top left of your screen. Closing these applications will solve that issue.

I guess that means we’ll be wrapping up now! I hope this guide was helpful for giving you the «ultimate» RCT2 Steam package.
Thanks for reading, and enjoy ROLLERCOASTER TYCOON 2!!

Источник

Как установить widescreen mod

Tomb Raider: The Last Revelation

By default old Tomb Raider games use 4:3 aspect ratio display format. That’s why Lara and other characters look so fat on widescreens. But you can download and install unofficial widescreen patch for 16:9, 16:10 or 5:4 displays. See below.

Все старые игры Tomb Raider используют устаревшее соотношение сторон (4:3). Из-за этого на современных широкоформатных мониторах многие вещи кажутся искаженными (вместо кругов – овалы, а вместо стройной Лары – бегает толстушка). Чтобы исправить это недоразумение существует неофициальный патч. См. ниже.

It’s work for Tomb Raider 2, 3 and 4.

That’s all. Have a nice play!

P.S. If you want to change graphic setting: run game with “-setup” parameter (you can set it from steam’s game settings or by create link in game folder).

Он подходит для нескольких игр серии (Tomb Raider 2, 3 и 4).

Источник